Technician A says that most crankshafts can be reground to be 0.010, 0.020, or 0.030 inch undersize. Technician B says that most engine bearings are constructed with an aluminum shell for strength and are covered with a tin-lead alloy. Who is right?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Question 2
Technician A says that a radio can receive AM signals, but not FM signals, if the antenna is defective.
Technician B says that a good antenna should give a reading of about 500 ohms when tested with an ohmmeter between the center antenna wire and ground. Who is right?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Wolf Spider in Maricopa City, Arizona, roughly 25mm (1 inch) while legs were retracted
The most commonly used socket drive sizes include 1/4, 3/8, and 1/2 inch drives.
To help locate how far the engine is being rotated, the technician is removing the distributor cap ...
Direct thumb pressure along the tibialis anterior. Start at proximal end, moving about 1 inch at a ...
Pharmacy Technician
Flo Hyman was a 6 foot 5 inch star on the U.S. women’s volleyball team that won a silver medal in ...