Two technicians are discussing MAP sensors. Technician A says that the MAP sensor should be replaced if anything comes out of the sensor when the vacuum hose is removed from the sensor. Technician B says that the injector pulse width should increase when vacuum to the MAP sensor is increased. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Question 2
When testing a MAP sensor that produces an analog voltage signal with 18 in. hg. applied to the sensor, the sensor signal is l.4 volts. When 13 in. hg. is supplied to the sensor, the sensor signal should be which of these voltage values?
A) 2.6 B) 1.6 C) 1.4 D) 2.3
A typical engine coolant temperature (ECT) sensor. ECT sensors are located near the thermostat ...
Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ...
A typical air vane sensor with the cover removed. The movable arm contacts a carbon resistance path ...
This five-wire mass air flow sensor consists of a metal foil sensing unit, an intake air temperature ...
Carefully check the hose between the MAF sensor and the throttle plate for cracks or splits that ...
The throttle pedal is connected to the accelerator pedal position (APP) sensor. The electronic ...