TEST-BANK for
Electronic Devices
10th Edition
Author(s): Floyd
Please allow up to 12 hours for payment to process. An email containing the test-bank will be sent immediately upon completion to the email address indicated in the payment form. Due to the sensitivity of these study aids, all sales are final. Please allow an hour for the payment to process. *All files come in PDF format, and are separated per chapter.*
Sample Questions
  • Refer to Figure 1. To calculate the input resistance looking in at Vin, dc sources are replaced with
  • A 1N4742A has a maximum power rating of 1.0 W at 50 C. The derating factor is 9.67 mW/C. If it is ...
  • Refer to Figure 1. Looking in at Vin, the input resistance is approximately
  • Refer to Figure 1. To calculate the input resistance looking in at Vin, you do not need to ...
  • Refer to Figure 1. If a large capacitor is placed in parallel with RE, the input resistance will
  • A fiber optics cable does not have
  • Refer to Figure 6. If you Thevenize the input to the base, the Thevenin resistance is
  • Refer to Figure 7. The input resistance of RIN(BASE)
  • A CMRR of 110,000 is expressed in dB as
  • When a phase-locked loop is used as an FM demodulator, the output is the same as the
  • Assume the curve in (b) represents the transistor in (a). Refer to Figure 2. If VS = 1.3 V, ...
  • When a phase-locked loop is locked, the difference frequency (fi - f0) is
  • Before a phase-locked loop (PLL) is locked the VCO is said to be
  • To create the difference frequency in an AM mixer, the process uses
3 people have viewed this page in the last 24 hours