Skills and Trades

Both the Thevenin and Norton theorems can be used with either single-source or multiple-source circuits.

Started by Lin Shi

Norton's theorem is used for simplifying a network in terms of currents instead of voltages.

Started by abcdef9106

Norton's theorem is used for simplifying a network in terms of currents instead of voltages.

Started by effaey

Norton's theorem reduces a resistive network to an ideal current source in parallel with resistance.

Started by hjfhdiskkjs

Ohm's law does not apply when you are using the superposition method of circuit analysis.

Started by warrenjean01

When applying the superposition theorem to a circuit, in order to zero a current source, we replace ...

Started by moore.cailinf

________ is an abbreviation for RMS.

Started by Adc3669

A(n) ________ is a number of conductive wires, wound in loops, which rotate through a magnetic field.

Started by joe3899

A lamp connected in series with a capacitor and an AC voltage source will light up. This is because:

Started by desireelg_7

For the circuit shown, the wattmeter reading would be

Started by jmoore1989

In a 60 Hz circuit, containing a 1.3 mH inductor, the inductive reactance is ________ ohms.

Started by olivia_rose

When a DC inductive circuit is turned off, the inductor's cemf can be much greater than the DC source voltage.

Started by ncasson210

Find the value of the voltage across the inductor for the vector diagram shown.

Started by jrobl3

For the circuit shown, the value of the inductive reactance (XL) of the coil would be

Started by tyratatyanna

From zero degrees, vectors are assumed to rotate

Started by unreallynx

In a series RC circuit the voltage is the same throughout the circuit.

Started by gboileau

In a series RC circuit, both resistance and capacitive reactance oppose current flow, and their ...

Started by dabomba718

Resistance, inductive reactance, and impedance are all measured in ohms.

Started by elarge

For the circuit shown, the value of IL would be

Started by emoedee

In a parallel RC circuit, the applied AC voltage is the same across each branch.

Started by gboileau

A coil in a transformer is also called a

Started by petersan

A load that is using 2500 VA of power is using ________ kVA.

Started by kmcolvin

Some transformers are provided with taps that are utilized when the ________ voltage is more or less ...

Started by Facerro

Specified nominal values of transformer voltage, current, and power ratings represent the ________ ...

Started by yulisa3298

The abbreviation AWG stands for

Started by Tiffanyanne824