Technology

Runouts are used to represent fillets that connect with plan surfaces tangent to cylinders. ...

Started by elizabeth18

By using 3D CAD, the task of determining intersections and developments is greatly reduced. ...

Started by amal

All the following statements regarding sectional views is correct except: a. All visible edges ...

Started by lracut11

The spacing between views must always be equal. Indicate whether the statement is true or ...

Started by KimWrice

A removed view may be used to show a feature of the object more clearly. Indicate whether the ...

Started by mp14

Subdivisions should be designed so that the maximum number of lots are above street grade. ...

Started by Themember4

In a spur gear, the radial distance from pitch circle to top of tooth is called: a. Circular ...

Started by lracut11

If you have a spur gear with a friction wheel of diameter equal to .25 at 210 rpm, what is the ...

Started by WhattoUnderstand

The screw having a thread of the same shape as a rack tooth is called the _____ Fill in the ...

Started by natalie2426

The reciprocating member of a cam is called the ________ Fill in the blank(s) with correct ...

Started by AEWBW

With regard to bevel gears, the angle between top of teeth and the gear axis is termed root angle. ...

Started by Starlight

Standard practice suggests that signal path runs: a. Bottom to top and left to right b. Top to ...

Started by mia

When using CAD gear design software, you are able to input the design requirements and the CAD ...

Started by waynest

Which of the following standards provides approved standard symbols? a. ANSI Y14.15 b. ANSI/IEEE ...

Started by lb_gilbert

Schematic and single-line diagrams should have the components arranged so that the transmission path ...

Started by tatyanajohnson

The most common building brick size is: a. 2 x 3 x 8 b. 2-1/4 x 3-3/4 x 8 c. 3 x 4 x 8 d. 4 x ...

Started by sabina

Based on the recommended symbol size, the circular part of a semiconductor should be drawn approx. ...

Started by imowrer

Electron tube pins are numbered counterclockwise from the tube base key when view from the bottom. ...

Started by chandani

The symbol for the American Standard I beam is: a. I b. M c. HP d. W e. ...

Started by Zoey63294

What is the symbol to indicate that wood requirement is to be square on two edges? __________ ...

Started by plus1

Detailed information concerning rolled steel dimensions, weights, and properties are found in ...

Started by @Brianna17

What is the note used when drawing half a welded roof truss that is symmetrical about the ...

Started by dmcintosh

Riveting is seldom used now in steel construction. Indicate whether the statement is true or ...

Started by jasdeep_brar

Vertical dimensions above a common datum are ___________. Fill in the blank(s) with correct ...

Started by Garrulous

The process of building a map using actual photographs of the land is called: a. Photogrammetry ...

Started by vicky