Homework Clinic

Hands-on Clinic => Skills and Trades => Topic started by: Capo on Aug 13, 2021

Title: Technician A says that the sharp edges of spool valves should be rounded using 400 grit sandpaper. ...
Post by: Capo on Aug 13, 2021

Technician A says that the sharp edges of spool valves should be rounded using 400 grit sandpaper. Technician B says that all valve body parts should be cleaned and then dried using low-pressure, filtered compressed air. Which technician is correct?
◦ Technician A only
◦ Technician B only
◦ Both technicians A and B
◦ Neither technician A nor B

Title: Technician A says that the sharp edges of spool valves should be rounded using 400 grit sandpaper. ...
Post by: jaygar71 on Aug 13, 2021

Technician B only