Technology

A map that shows water, relief, and culture is known as a: a. Military map b. Topographic map ...

Started by jho37

A series of intersecting lines that forms a polygon defines a ___________________ Fill in the ...

Started by Kthamas

A map created from photographs of the earth's surface describes ___________________. Fill in the ...

Started by Arii_bell

The location of points along a route survey is known as stationing. Indicate whether the ...

Started by geoffrey

The level may be used to measure horizontal angles accurately. Indicate whether the statement is ...

Started by jc611

Hidden lines are usually not drawn in assembly drawings. Indicate whether the statement is true ...

Started by Jipu 123

The reproduction process requiring exposure to light and ammonia vapor is the: a. Diazo-moist b. ...

Started by yoooooman

A photographic image of information, records, or drawings that is stored on film at a greatly ...

Started by 123654777

What is the tap drill diameter on an M33x3.5? __________ Fill in the blank(s) with correct ...

Started by cagreen833

What is the bolt max thickness of a high strength structural bolt of a M16x2 ? ________ Fill in ...

Started by panfilo

What is the tap drill size on an 8UN 1 screw? __________ Fill in the blank(s) with correct ...

Started by itsmyluck

What is the radius of the curved head of a pan head machine screw, having a nominal size of 8? ...

Started by newbem

Which of the following is not true regarding patent drawings? a. You may submit drawings by hand ...

Started by Haya94

Separate sets of drawings for a part that may be reused in a different design are called ...

Started by silviawilliams41

Concrete members that have steel embedded in them are called pre-stressed concrete. Indicate ...

Started by aabwk4

CAD processes that involve mate, mate offset, align, insert, and orient are part of a group of ...

Started by joblessjake

When submitting patent drawings, colored drawings, and/or photographs may be included for ...

Started by clmills979

When receding lines are drawn at half scale, the view created is called: a. Isometric view b. ...

Started by ENagel

Revised drawings must be ______________ for future reference. a. Tracked b. Identified c. ...

Started by laurencescou

Legal standards for the retention of engineering drawings require that they be retained for: a. 2 ...

Started by anshika

An effective drawing/document management software requires setup tome, training, and ongoing effort ...

Started by codyclark

In the final drawing, cutting plane lines should be drawn thick. Indicate whether the statement ...

Started by rachel9

Where mating surfaces meet in assembly drawings, no change is indicated in the section lines. ...

Started by cherise1989

Typically circular objects are drawn using half sections where required. Indicate whether the ...

Started by 2125004343

An auxiliary view is always drawn: a. Perpendicular to the inclined surface b. Parallel to the ...

Started by s.tung