« previous next »

Author Question: When a load is applied to a potentiometer, the voltage across a load connected to the wiper arm is ... (Read 119 times)

DyllonKazuo

  • Hero Member
  • *****
  • Posts: 565
on: Jul 28, 2018
When a load is applied to a potentiometer, the voltage across a load connected to the wiper arm is determined solely by the potentiometer.
 
  Indicate whether the statement is true or false

Question 2

If the RT = 6.8 k and R1 = 10 k in a two-branch parallel circuit, what is the value of R2?
 
  A) 12 k B) 3.2 k C) 16.8 k D) 21.3 k


lin77x

  • Sr. Member
  • ****
  • Posts: 326
Reply #1 on: Jul 28, 2018
Answer to Question 1

FALSE

Answer to Question 2

D


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

Approximately 70% of expectant mothers report experiencing some symptoms of morning sickness during the first trimester of pregnancy.

Did you know?

The liver is the only organ that has the ability to regenerate itself after certain types of damage. As much as 25% of the liver can be removed, and it will still regenerate back to its original shape and size. However, the liver cannot regenerate after severe damage caused by alcohol.

Did you know?

On average, the stomach produces 2 L of hydrochloric acid per day.

Did you know?

Eat fiber! A diet high in fiber can help lower cholesterol levels by as much as 10%.

Did you know?

Intradermal injections are somewhat difficult to correctly administer because the skin layers are so thin that it is easy to accidentally punch through to the deeper subcutaneous layer.

The high-voltage shut-off switch on a Ford Escape hybrid. The switch is located under the carpet at ... The high-voltage shut-off switch on a Ford Escape hybrid. The switch is located under the carpet at ...
Using a DMM to measure the open-circuit voltage of a battery. Using a DMM to measure the open-circuit voltage of a battery.
Headlights were turned off and the battery voltage quickly recovered to indicate 12.6 volts. Headlights were turned off and the battery voltage quickly recovered to indicate 12.6 volts.
The varying voltage signal from the pickup coil triggers the ignition module. The ignition module ... The varying voltage signal from the pickup coil triggers the ignition module. The ignition module ...
When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ... When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ...
An injector tester being used to check the voltage drop through the injector while the tester is ... An injector tester being used to check the voltage drop through the injector while the tester is ...
Video: The Lac Operon in E. Coli

For a complete list of videos, visit our video library