« previous next »

Author Question: Used engine oil should be disposed of by all these methods EXCEPT ________. A) Disposed of in ... (Read 116 times)

littleanan

  • Hero Member
  • *****
  • Posts: 575
on: Jun 23, 2018
Used engine oil should be disposed of by all these methods EXCEPT ________.
 
  A) Disposed of in regular trash B) Burned on-site in a waste oil-approved heater
  C) Burned off-site in a waste oil-approved heater D) Shipped off-site for recycling

Question 2

An oil filter should be hot drained for how long before disposing of the filter?
 
  A) 30 to 60 minutes B) 8 hours C) 12 hours D) 4 hours


Shshxj

  • Sr. Member
  • ****
  • Posts: 335
Reply #1 on: Jun 23, 2018
Answer to Question 1

A

Answer to Question 2

C


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

Green tea is able to stop the scent of garlic or onion from causing bad breath.

Did you know?

Cucumber slices relieve headaches by tightening blood vessels, reducing blood flow to the area, and relieving pressure.

Did you know?

All adults should have their cholesterol levels checked once every 5 years. During 2009–2010, 69.4% of Americans age 20 and older reported having their cholesterol checked within the last five years.

Did you know?

Though “Krazy Glue” or “Super Glue” has the ability to seal small wounds, it is not recommended for this purpose since it contains many substances that should not enter the body through the skin, and may be harmful.

Did you know?

Not getting enough sleep can greatly weaken the immune system. Lack of sleep makes you more likely to catch a cold, or more difficult to fight off an infection.

Coolant circulates through the water jackets in the engine block and cylinder head. Coolant circulates through the water jackets in the engine block and cylinder head.
A typical oil pump mounted in the front cover of the engine that is driven by the crankshaft. A typical oil pump mounted in the front cover of the engine that is driven by the crankshaft.
Engine oil pressure is used to switch cam lobes on a VTEC system. Engine oil pressure is used to switch cam lobes on a VTEC system.
After the engine has been cranked for four “puffs,” stop cranking the engine and observe the ... After the engine has been cranked for four “puffs,” stop cranking the engine and observe the ...
Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ... Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ...
(a) As an engine is accelerated under a load, the engine vacuum drops. This drop in vacuum is ... (a) As an engine is accelerated under a load, the engine vacuum drops. This drop in vacuum is ...
Video: Homologous chromosomes during prophase I - Animation

For a complete list of videos, visit our video library