Author Question: Which of the following types of high-frequency ventilation involves the delivery of pulsations under ... (Read 48 times)

ec501234 · **on:** Jul 16, 2018

Which of the following types of high-frequency ventilation involves the delivery of pulsations under pressure through a small lumen at rates of 1.7 to 10 Hz?

a. Jet c. Positive-pressure
b. Oscillatory d. Flow interruption

Question 2

Which of the following ventilator modes is represented by the pressure-time scalar in the figure?

a. Volume-controlled intermittent mandatory ventilation with positive end-expiratory pressure
b. Pressure-controlled intermittent mandato-ry ventilation with positive end-expiratory pressure
c. Pressure-augmented, volume-guaranteed breaths
d. Proportional assist ventilation

Melissahxx · **Reply #1 on:** Jul 16, 2018

Answer to Question 1

ANS: A
High-frequency jet ventilation operates by passing gas from a high-pressure source through a var-iable regulator that reduces the pressure to the desired working level. The gas passes through a device, usually a solenoid or a fluidic valve, which governs the amount and duration of flow. The gas jet is delivered through a specially made triple-lumen endotracheal tube, which is similar to conventional endotracheal tubes except that two additional small lines are added. One line is for delivering jet ventilation, and the other is for monitoring distal airway pressures.

Answer to Question 2

ANS: B
The pressure-time waveform is raised from the zero line; this means that there is positive end-expiratory pressure. The flat pressure wave is indicative of pressure-limited breaths. The higher level represents the ventilator pressure-limited breath, and the lower level waveform rep-resents the pressure-supported breaths.