Skills and Trades

What is the proper distance from the foot of a straight ladder to the wall?

Started by lauraleepop

Electric shock occurs when the body becomes part of the electric circuit.

Started by warrenjean01

An atom possesses a neutral electric charge because:

Started by xman15.

Most metals are poor conductors.

Started by nanna

Voltage is produced in a generator by means of:

Started by 903f23fj0

Polarity is normally identified only on DC circuits.

Started by fungirl

The attractive or repulsive force that is exerted between two charged particles is directly ...

Started by ncasson210

The voltmeter is connected ________ to measure voltage.

Started by awgagawg

What is the resistance of an electric iron with a nameplate rating of 120 volts and 10 amps?

Started by M1ch3a

Which of the following is an example of a voltage source?

Started by lingual

Analog meters are particularly not suited for trend observation, as in slowly changing voltage levels.

Started by llesku

The multiplier represented by the metric prefix kilo is:

Started by emoedee

What is the basic unit of electrical power?

Started by haydenjmcm

A current of A equals 50 milliamperes.

Started by mt05945

A graph of the current versus voltage for a nonlinear incandescent lamp load is a straight line.

Started by campbellfam07

According to Ohm's law E = RI.

Started by ahunt13

E (in volts) = I (in milliamperes) x R (in kilohms)

Started by mmmmm

One microampere represents a greater current flow than one milliampere.

Started by dhsndn

The resistance between the outside terminals of a linear potentiometer is measured and found to be ...

Started by jordangardner

The resistor shown would be rated for a resistance value of ________ and a tolerance of ________.

Started by Apple716

The resistor shown would be rated for a resistance value of ________ and a tolerance of ________.

Started by poopoo

Which band of the five-band precision resistor color code designates the multiplier?

Started by warrenjean01

Which of these has a deposited resistive element that is scribed in a spiral fashion of the resistor?

Started by Maddie9229

The length and width of the groove on a film-type resistor determines its resistance value.

Started by Hunchojack2019!!

To connect resistors in parallel they are joined end to end.

Started by najmarocks25