Skills and Trades

For the root pass on pipe in the 2G position, the gun should be at a 10- to 15-degree _____. a. ...

Started by dollx

When using a permanent backing ring, insert the ring inside one of the coupons and make an allowance ...

Started by APUS57

When welding aluminum pipe in the 2G position with GMAW, run the remaining passes using a slight ...

Started by Engineer

Chain hoists are designed for _____. a. angled lifts b. horizontal pulls c. angled and vertical ...

Started by washai

A chain should be removed from service if any portion is worn by more than _____. a. 15 percent ...

Started by Sufayan.ah

When welding in the 1G-ROTATED position, what could cause the bearings in a pipe roller to become ...

Started by SGallaher96

Tuggers are actually pneumatically operated _____. a. jacks b. trucks c. tow motors d. ...

Started by burchfield96

Shoulderless eyebolts can be used to make _____. a. vertical lifting pulls only b. angled ...

Started by Mr.Thesaxman

The type of jack that can only be used to raise loads under 25 tons is the _____. a. screw jack ...

Started by big1devin

ASME B30.10 requires that a hook be replaced if its body has been deformed _____. a. by any ...

Started by SGallaher96

A natural fiber or synthetic rope line used to control the swinging of the load in hoisting ...

Started by piesebel

Feathering the ends of the tack welds with a grinder helps to _____. a. ensure the root pass has ...

Started by tth

The width of the root face on GMAW open-root V-groove welds on carbon steel pipe should be _____. ...

Started by roselinechinyere27m

A heavy-duty tool used to drive posts or other large stakes is a _____. a. mallet b. ...

Started by vicotolentino

How many sides does a hexagonal shape have? a. Four b. Five c. Six d. ...

Started by casperchen82

Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____. ...

Started by burchfield96

The type of screw shown in the figure above is a(n) _____. a. Phillips head b. Torx c. Allen ...

Started by javeds

The saw shown in the figure above is called a _____. a. keyhole saw b. drywall saw c. coping ...

Started by j.rubin

The safest kind of utility knife is one with a _____. a. retractable blade b. replaceable blade ...

Started by Sufayan.ah

A chain fall locks its elevated load in place using _____. a. an automatic brake b. the chain ...

Started by Lobcity

For long-term welding of materials that may produce toxic fumes, a welder should wear a full-face ...

Started by P68T

In engines that power generators, the engine speed is controlled by _____. a. governors b. ...

Started by lracut11

All carbon steel filler metals used for GMAW contain _____. a. a flux core b. slag c. alloys ...

Started by kwoodring

To minimize distortion when cutting thin steel, _____. a. avoid preheating the metal before ...

Started by nmorano1

Chain slings require a thorough periodic inspection at least _____. a. once a year b. twice a ...

Started by mikaylakyoung