Skills and Trades

For the 208/120 Volt three-phase four-wire system shown, the voltage from A to B would be:

Started by ega16

Each phase of three-phase AC power is offset by:

Started by Labomba

Compare to an equivalent one-phase system, three-phase system:

Started by rubiosusy7

Alternator ________ is the process of connecting a three-phase alternator to another alternator or ...

Started by dekbert

A(n) ________ is a number of conductive wires, wound in loops, which rotate through a magnetic field.

Started by joe3899

A delta-connected set of windings has a phase voltage of 100 V. The line voltage is:

Started by Ale

________ would be equivalent term for cycles per second.

Started by frosh101

________ is/are attached to the armature and rotate with the armature.

Started by unreallynx

________ is the output of an AC generator measured in cycles per second.

Started by llesku

________ is an abbreviation for RMS.

Started by Adc3669

When VRL for many values of RL must be determined, a circuit should be thevenized.

Started by dongbo

When VRL for many values of RL must be determined, a circuit should be thevenized.

Started by Gabby

When there is more than one power source in a circuit or loop, the current is affected by each of the sources.

Started by fungirl

When applying the superposition theorem, the direction of the resultant current for two currents ...

Started by campbellfam07

When applying the superposition theorem, the direction of the resultant current for two currents ...

Started by blinding37

When applying the superposition theorem to a circuit, in order to zero a current source, we replace ...

Started by moore.cailinf

When a Norton equivalent circuit is converted to Thevenin equivalent circuit RTH will be equal to RN.

Started by frosh101

When a Norton equivalent circuit is converted to Thevenin equivalent circuit RTH will be equal to RN.

Started by heyheyhey

There is in actuality, no such thing as a constant or ideal voltage source.

Started by Tiffanyanne824

The Thevenin theorem is used to reduce a complex circuit to an equivalent-circuit voltage source.

Started by blinding37

The Thevenin theorem is used to reduce a complex circuit to an equivalent-circuit voltage source.

Started by jmoore1989

The superposition theorem is used to solve circuits with single voltage or current source.

Started by caca31

The superposition theorem is applicable only to multiple-source circuits.

Started by kms5229

The superposition theorem is applicable only to multiple-source circuits.

Started by gjjjjjdkkkkk3k3k33k

The Norton resistance (RN) is always in parallel with the Norton current (IN).

Started by kmoyer2