Skills and Trades

An ideal voltage source supplies any amount of current with no change in its:

Started by meganh99

An ideal voltage source should have:

Started by nods

When one of the two line fuses of a three-wire system blows, it is possible to have voltages that no ...

Started by Labomba

The total power in a series-parallel circuit is equal to the sum of the power produced by each load ...

Started by mt05945

The current through the neutral conductor of a balanced three-wire circuit will be zero.

Started by xsk4r3kr0w

Any part of a combination series-parallel circuit in which the current is split into two or more ...

Started by gjjjjjdkkkkk3k3k33k

According to Kirchhoff's voltage law, adding up all of the voltage drops around any DC-circuit ...

Started by Aimless0988

A shorted resistor will have infinite resistance.

Started by kaitlynndavis

When tracing currents in a three-wire circuit, you should keep in mind that the current flowing into ...

Started by meganh99

Total current in a series-parallel circuit is determined by dividing the total ________ by the total ________.

Started by olgamartinez04

Series-parallel circuits in which it is difficult to identify which components are in parallel and ...

Started by effaey

Kirchhoff's voltage law states:

Started by wqwpfwpoefnpwenf

Kirchhoff's current law states:

Started by Tb12162018

For the circuit shown, the voltage drop across resistors R3 and R4 would be:

Started by 903f23fj0

For the circuit shown, the voltage drop across resistor R3 would be:

Started by Triley39

For the circuit shown, the voltage drop across resistor R2 would be:

Started by ega16

For the circuit shown, the voltage drop across resistor R1 would be:

Started by abcdef9106

For the circuit shown, the value of the voltage drop across R4 would be:

Started by hjfhdiskkjs

For the circuit shown, the value of the voltage drop across R1 would be:

Started by Lin Shi

For the circuit shown, the value of the current flow through R4 would be:

Started by sreghbsidhgjbndskijgnio

For the circuit shown, the value of the current flow through R2 would be:

Started by BSITTON

For the circuit shown, the value of the current flow through R1 would be:

Started by Mscarter

For the circuit shown, the value of the applied voltage source would be:

Started by Aimless0988

For the circuit shown, the total resistance would be:

Started by rubiosusy7

For the circuit shown, the total power dissipated by the circuit would be:

Started by jordangardner