The vacuum hose from the fuel-pressure regulator was removed from the regulator and gasoline dripped out of the hose. Technician A says that this is normal and that everything is okay. Technician B says that one or more of the injectors may be defective, causing the fuel to get into the hose. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Question 2
Port fuel-injection systems generally use what type of injector driver?
A) Peak and hold B) Saturated switch
C) Pulsed D) Pulse-width modulated
Exercise and Blood Pressure
A schematic of a Stanadyne diesel fuel injection pump assembly showing all of the related ...
A gasoline testing kit, including an insulated container where water at 100°F is used to heat a ...
A two-piece compression gauge set. The threaded hose is screwed into the spark plug hole after ...
A typical output driver. In this case, the PCM applies voltage to the fuel pump relay coil to ...
Development of Foliation due to Directed Pressure