Author Question: If a blower motor has seized or dragging bearings, it will pull too many amps when on high. This can ... (Read 219 times)

cnetterville · **on:** Jun 23, 2018

If a blower motor has seized or dragging bearings, it will pull too many amps when on high. This can be checked by using a ________.

A) Test light B) Fused 20A jumper wire
C) New blower resistor pack D) Disconnecting the battery

Question 2

Two technicians are discussing finding a short to ground using a test light. Technician A says that the test light, connected in place of the fuse, will light when the circuit that has the short is disconnected. Technician B says that the test light should be connected to the positive (+) and negative (-) terminals of a battery during this test. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician