« previous next »

Author Question: Most secondary fuel filters should not be prefilled before installation because: a. this will ... (Read 43 times)

azncindy619

  • Hero Member
  • *****
  • Posts: 562
on: Jun 23, 2018
Most secondary fuel filters should not be prefilled before installation because:
 
  a. this will make the system hard to bleed
 b. the primary filter will receive unfiltered fuel c. the injectors will run dry
 d. there will be unfiltered fuel going to the high pressure fuel system

Question 2

If an alternator had a pulley with a 3:1 ratio to the crankshaft and the e engine was turning 1800 RPM then the alternator would be turning at:
 
  a. 300 RPM
 b. 600 RPM
 c. 1800 RPM
 d. 5400 RPM


kaillie

  • Sr. Member
  • ****
  • Posts: 326
Reply #1 on: Jun 23, 2018
Answer to Question 1

D

Answer to Question 2

D


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

Cucumber slices relieve headaches by tightening blood vessels, reducing blood flow to the area, and relieving pressure.

Did you know?

One way to reduce acid reflux is to lose two or three pounds. Most people lose weight in the belly area first when they increase exercise, meaning that heartburn can be reduced quickly by this method.

Did you know?

About 100 new prescription or over-the-counter drugs come into the U.S. market every year.

Did you know?

According to animal studies, the typical American diet is damaging to the liver and may result in allergies, low energy, digestive problems, and a lack of ability to detoxify harmful substances.

Did you know?

If you use artificial sweeteners, such as cyclamates, your eyes may be more sensitive to light. Other factors that will make your eyes more sensitive to light include use of antibiotics, oral contraceptives, hypertension medications, diuretics, and antidiabetic medications.

Terpenoids as secondary metabolites Terpenoids as secondary metabolites
Wound healing by secondary intention. Wound healing by secondary intention.
An engine will not run if the air–fuel mixture is either too rich or too lean. An engine will not run if the air–fuel mixture is either too rich or too lean.
A lack of fuel flow could be due to a restricted fuel-pressure regulator. Notice the fine screen ... A lack of fuel flow could be due to a restricted fuel-pressure regulator. Notice the fine screen ...
Use a DMM set to read DC volts to check the voltage drop of the positive circuit to the fuel ... Use a DMM set to read DC volts to check the voltage drop of the positive circuit to the fuel ...
The fuel level must be above 15% and below 85% before the EVAP monitor will run on most vehicles. The fuel level must be above 15% and below 85% before the EVAP monitor will run on most vehicles.
Video: Exercise and cardiac output & Definition of stroke volume

For a complete list of videos, visit our video library