Technician A says that a bleeder valve is located on many engines to allow air to escape when refilling the cooling system. Technician B says that a hose should be attached to the bleeder valve to allow any escaping coolant to be directed to a suitable container. Which technician is correct?
A) Technician A only B) Technician B only
C) Both Technicians A and B D) Neither Technician A nor B
Question 2
Heated mirror operation is usually tied into the ________ circuit.
A) Headlight B) Heated steering wheel
C) Heated rear window D) Heated seat
Chrysler recommends that the bleeder valve be opened whenever refilling the cooling system.
The camshaft is rotated in relation to the camshaft by the PCM to provide changes in valve timing.
A variable valve timing solenoid being controlled by applying voltage from the PCM.
The bypass actuator opens the bypass valve to control boost pressure.
To help locate how far the engine is being rotated, the technician is removing the distributor cap ...
This spark plug boot on an overhead camshaft engine has been arcing to the valve cover causing a ...