This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: How are voltmeters connected to read the voltage drop across a load in a circuit? A) Any ... (Read 69 times)

nelaaney

  • Hero Member
  • *****
  • Posts: 560
on: Jul 24, 2018
How are voltmeters connected to read the voltage drop across a load in a circuit?
 
  A) Any connection to the circuit will give the same reading.
  B) One lead is connected to the load, and the other lead is connected to ground.
  C) Voltmeters are connected in series with the load.
  D) Voltmeters are connected in parallel with the load.

Question 2

Which organizations specify standards for electric motors? More than one response required.
 
  A) Air-conditioning Heating Refrigeration Institute (AHRI)
  B) American Society Heating Refrigeration Air-conditioning Engineers ASHRAE
  C) National Electrical Manufacturers Association (NEMA)
  D) International Electrotechnical Commission (IEC)


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

mtmmmmmk

  • Sr. Member
  • ****
  • Posts: 335
Reply #1 on: Jul 24, 2018
Answer to Question 1

D

Answer to Question 2

C, D


nelaaney

  • Member
  • Posts: 560
Reply 2 on: Jul 24, 2018
Excellent

shewald78

  • Member
  • Posts: 340
Reply 3 on: Yesterday
:D TYSM

« previous next »
 

Did you know?

To prove that stomach ulcers were caused by bacteria and not by stress, a researcher consumed an entire laboratory beaker full of bacterial culture. After this, he did indeed develop stomach ulcers, and won the Nobel Prize for his discovery.

Did you know?

Signs and symptoms of a drug overdose include losing consciousness, fever or sweating, breathing problems, abnormal pulse, and changes in skin color.

Did you know?

When Gabriel Fahrenheit invented the first mercury thermometer, he called "zero degrees" the lowest temperature he was able to attain with a mixture of ice and salt. For the upper point of his scale, he used 96°, which he measured as normal human body temperature (we know it to be 98.6° today because of more accurate thermometers).

Did you know?

If you could remove all of your skin, it would weigh up to 5 pounds.

Did you know?

Most strokes are caused when blood clots move to a blood vessel in the brain and block blood flow to that area. Thrombolytic therapy can be used to dissolve the clot quickly. If given within 3 hours of the first stroke symptoms, this therapy can help limit stroke damage and disability.

Voltmeter hook-ups for voltage-drop testing of a Ford-type cranking circuit. Voltmeter hook-ups for voltage-drop testing of a Ford-type cranking circuit.
Using the voltmeter leads from a starting and charging test unit to measure the voltage drop ... Using the voltmeter leads from a starting and charging test unit to measure the voltage drop ...
A plastic MAP sensor used for training purposes showing the electronic circuit board and electrical ... A plastic MAP sensor used for training purposes showing the electronic circuit board and electrical ...
Set the meter to read ohms (V) and measure the resistance of the relay coil. The usual reading for ... Set the meter to read ohms (V) and measure the resistance of the relay coil. The usual reading for ...
Literacy Development in the Early Years: Helping Children Read and Write Literacy Development in the Early Years: Helping Children Read and Write
Drug Action Through Channels, via Voltage Changes or Chemicals Drug Action Through Channels, via Voltage Changes or Chemicals
Video: Cellular Defects - Osteoblasts, Osteoclasts and Osteocytes

For a complete list of videos, visit our video library