When you are measuring current with a clamp-on ammeter, you should ________.
A) open the jaws of the meter and place them around the wire where you want to measure the current
B) turn off all power to the circuit so that you don't get shocked
C) create an open in the circuit and place the meter probes so that the meter is in series with the load
Question 2
When making a resistance measurement, you should ________.
A) turn off all power to the circuit and isolate the component you want to measure
B) create an open in the circuit and place the meter probes so that the meter is in series with the load
C) keep all voltage applied to the component you are measuring so you can determine the true resistance
How stomatal pores open and close.
Open space is found in a Lodgepole pine stand after thinning.
B, regulating roller clamp and slide clamp;
Oral cavity: (A) sagittal section; (B) anterior view as seen through the open mouth.
Block open the throttle (and choke, if the engine is equipped with a carburetor). Here a screwdriver ...
A series of two PET scans. A scan was done when the volunteer’s eyes were either open (left) or ...