Author Question: For final finishing passes on the cylindrical grinder, the amount to be removed per traverse should ... (Read 69 times)

chandani · **on:** Jul 26, 2018

For final finishing passes on the cylindrical grinder, the amount to be removed per traverse should be:

A) .0002 in. B) .002 inch C) .001 inch D) .002 inch or less

Question 2

To avoid the use of paper to protect the surface of the chuck, what must be done to prepare a scaly heat-treated workpiece before grinding?

A) The heat treatment scale must be removed before chucking
B) The workpiece must be annealed
C) The workpiece must be tempered
D) Remove the chuck and clamp directly to the table