Author Question: While aligning a workhead, the head clamping bolts should be: A) Removed B) Loose C) Tight D) ... (Read 111 times)

cherise1989 · **on:** Jul 26, 2018

While aligning a workhead, the head clamping bolts should be:

A) Removed B) Loose
C) Tight D) Exerting a slight drag

Question 2

To position the spindle axis precisely over a workpiece edge:

A) Move the table while observing the micrometer dials
B) Use an edge finder
C) Use a dial indicator and a precision parallel
D) All of the above