Taps may break when tapping: A) If the chips clog the flutes ...

[c0205847]

Taps may break when tapping:
 
  A) If the chips clog the flutes B) If the holes are drilled too deep
  C) Because the tap drill was too large D) If the tap used is too sharp

Question 2

In order to cut a radius of 5/8 (.625 ) inch, a saw width of ________ inch is required. (Consult the job selector on the band machine in your shop.)
 
  A) 1/2 (.500 ) in. B) 1/16 .0625 ) in. C) 5/16 (.3125 ) in. D) 1/4 (.250 ) in.

[Bison]

Answer to Question 1

A

Answer to Question 2

D