« previous next »

Author Question: Identify two advantages of using inserts in injection molds. What will be an ideal ... (Read 14 times)

krzymel

  • Hero Member
  • *****
  • Posts: 548
on: Aug 19, 2018
Identify two advantages of using inserts in injection molds.
 
  What will be an ideal response?

Question 2

Why is continuous extrusion blow molding not recommended for very large blow molded parts?
 
  What will be an ideal response?


gcook

  • Sr. Member
  • ****
  • Posts: 343
Reply #1 on: Aug 19, 2018
Answer to Question 1

Inserts allow a single base to be used for multiple parts.
Inserts can be changed and modified easily should they be damaged.

Answer to Question 2

The extrusion of the parison for a very large part will often take a considerable amount of time. During this time the parison may begin to sag under its own weight. It could also begin to cool and therefore become more difficult to form.


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

Barbituric acid, the base material of barbiturates, was first synthesized in 1863 by Adolph von Bayer. His company later went on to synthesize aspirin for the first time, and Bayer aspirin is still a popular brand today.

Did you know?

Your skin wrinkles if you stay in the bathtub a long time because the outermost layer of skin (which consists of dead keratin) swells when it absorbs water. It is tightly attached to the skin below it, so it compensates for the increased area by wrinkling. This happens to the hands and feet because they have the thickest layer of dead keratin cells.

Did you know?

All adverse reactions are commonly charted in red ink in the patient's record and usually are noted on the front of the chart. Failure to follow correct documentation procedures may result in malpractice lawsuits.

Did you know?

The FDA recognizes 118 routes of administration.

Did you know?

When Gabriel Fahrenheit invented the first mercury thermometer, he called "zero degrees" the lowest temperature he was able to attain with a mixture of ice and salt. For the upper point of his scale, he used 96°, which he measured as normal human body temperature (we know it to be 98.6° today because of more accurate thermometers).

Intramuscular injection. Intramuscular injection.
Many former slaves understood that illiteracy was an implement of bondage. The Freedmen’s Bureau bui Many former slaves understood that illiteracy was an implement of bondage. The Freedmen’s Bureau bui
Administering an Intradermal Injection Administering an Intradermal Injection
What are examples of ideal forms? What are examples of ideal forms?
A typical injector-pump-type automotive diesel fuel injection system. A typical injector-pump-type automotive diesel fuel injection system.
A typical direct-injection system uses two pumps—one low-pressure electric pump in the fuel tank ... A typical direct-injection system uses two pumps—one low-pressure electric pump in the fuel tank ...
Video: Red Blood Cells - Erythropoietin (EPO)

For a complete list of videos, visit our video library