A vehicle tends to lock up the front wheels when being braked on slippery road surfaces. Technician A says that the metering valve may be defective. Technician B says the proportioning valve may be defective. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Question 2
When the brakes are applied in a panic situation, the rear brakes have a tendency to skid. The most likely cause is ________.
A) Compensation port clogged in the master cylinder
B) Proportioning valve is faulty
C) Metering valve is faulty
D) Quick take-up valve in the master cylinder
A longitudinally mounted engine drives the rear wheels through a transmission, driveshaft, and ...
A typical beginning technician tool set that includes the basic tools to get started.
The pad arm is just contacting the rocker panel of the vehicle.
Many electronic components are used to construct a typical vehicle computer. Notice the quantity of ...
A symbol used on a Chrysler vehicle indicating a fault with the electronic throttle control.
Mechanisms That Lift Air: Cold front example