When reading equipment manuals, it is best to
a. read the manual completely from start to finish.
b. simply use the equipment, checking the manual only if necessary.
c. make notes on procedures, then apply them using the equipment.
d. work with the manual and the equipment simultaneously.
Question 2
The statement, The city council has approved the implementation of lethal means as part of its strategic plan for humane management of the local deer population, is an example of
a. an allusion.
b. a clich.
c. doublespeak.
d. jargon.
If the gauge reading is now much higher than the first test results, then the cause of the low ...
After all valves have been properly measured and adjusted as necessary, start the reassembly process ...
Checking an ignition coil using a multimeter set to read ohms.
When the propane is shut off, the oxygen sensor should read below 200 mV.
Connect the leads of the meter to contacts 30 and 87 of the relay socket. The reading of 4.7 ...
Brush off front to finish. Long brushing strokes from head to feet to finish.