Which of the following are necessary features to look for in ...

[mckennatimberlake]

Which of the following are necessary features to look for in selecting a heated humidifier?
 
  1. Water level readily visible
  2. Over-temperature protection
  3. Auditory and visual alarms
  4. Minimal temperature overshoot
  a. 2 and 4 only
  b. 1, 2, and 3 only
  c. 3 and 4 only
  d. 1, 2, 3, and 4

Question 2

When using a servo-controlled heated humidifier to deliver gas to an infant, the thermistor probe should be placed where?
 
  a. Inside the circuit, outside the incubator, or away from the radiant warmer
  b. Outside the circuit, inside the incubator, or away from the radiant warmer
  c. Inside the circuit, inside the incubator, or away from the radiant warmer
  d. Outside the circuit, outside the incubator, or away from the radiant warmer

[jackie]

Answer to Question 1

ANS: D

Answer to Question 2

ANS: A
Place heated humidifier thermistor probes in the inspiratory limb of a ventilator circuit far enough from the patient Y adaptor to ensure that warm exhaled gas does not fool the controller system. Never place a thermistor probe in an isolette or a radiant warmer, where the probe is warmed ex-ternally and the humidifier is fooled into shutting down, reducing the humidity available to the patient.

[mckennatimberlake]

Thanks for the timely response, appreciate it

[lcapri7]

TYSM