During infant ventilation with the CareFusion AVEA Ventilator and ...

[darbym82]

During infant ventilation with the CareFusion AVEA Ventilator and the Cosmo Plus Monitor, the readings on the Cosmo Plus Monitor have blanked out. What is the cause of this problem?
 
  a. Elevated pressure in the device c. Monitor is out of calibration
  b. Condensation in the device d. Monitor is calibrat-ing

Question 2

NeoFlow on a Drger E-4 requires the installation of a flow sensor into which part of the patient circuit?
 
  a. Before the inspiratory line
  b. Between the endotracheal tube and the Y-connector
  c. Proximal to the exhalation flow sensor
  d. Between the inspiratory filter and the hu-midifier

[nekcihc358]

Answer to Question 1

ANS: B
One of the concerns with the use of the Cosmo Plus is that the readings become blanked out when water condensation accumulates in the device.

Answer to Question 2

ANS: B
NeoFlow requires the placement of a flow sensor between the artificial airway and the Y-connector of the patient circuit.

[darbym82]

Excellent

[frankwu0507]

Thanks for the timely response, appreciate it