Answer to Question 1
In the air handling unit, air passes through the filters, preheater, cooling coil, heating coil, reheater, and finally the fan. This type of system is referred to as a draw-through system because the fan is located after the coils and draws the air across them. A blow-through system would locate the fan before the coils.
Answer to Question 2
Refrigerant is drawn into the tip and travels between an infrared light source and an infrared light sensor. When refrigerant enters the tip, it reflects the infrared radiation and blocks the sensor from seeing it, much like a cloud can block the sun on a cloudy day.
The difference between AZT-sensitive versus AZT-resistant reverse transcriptases
A journey through the digestive system
Male genitourinary system.
Block Diagram of Single-stage Pressure System for Dual-Stage Pressure Production of Nitric Acid
Schematic of a typical electronic throttle control (ETC) system. Note that terminal #5 is always ...
Female Reproductive System