This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: What process parameters affect the part quality the most? Discuss 2 or 3 of these parameters and ... (Read 78 times)

Bernana

  • Hero Member
  • *****
  • Posts: 530
on: Aug 19, 2018
What process parameters affect the part quality the most? Discuss 2 or 3 of these parameters and their specific effects on part quality. Which is the most important for cycle time?
 
  What will be an ideal response?

Question 2

You are asked to specify the material for an extremely large part. The boss says he wants a high MI material. Why would this be beneficial, and what effect would the choice have on material properties? (Density, impact resistance, tensile and flexural properties, etc.)
 
  What will be an ideal response?


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

raili21

  • Sr. Member
  • ****
  • Posts: 324
Reply #1 on: Aug 19, 2018
Answer to Question 1

Some of these parameters could be temperature of melt, temperature of mold, pressure of injection and holding, injection or fill-rate and time, dwell time, freeze time, ejection time, etc. The cooling time is the most important for cycle time in injection molding.

Answer to Question 2

The higher the MI the more material will be extruded faster in order to create the really large part. The properties of such a material would result in a part that would have a higher impact resistance because of its higher tensile strength. These characteristics would also assume that the material would have greater flexural properties and lower crystallinity.


Bernana

  • Member
  • Posts: 530
Reply 2 on: Aug 19, 2018
YES! Correct, THANKS for helping me on my review

ricroger

  • Member
  • Posts: 352
Reply 3 on: Yesterday
Gracias!

« previous next »
 

Did you know?

The first war in which wide-scale use of anesthetics occurred was the Civil War, and 80% of all wounds were in the extremities.

Did you know?

More than 4.4billion prescriptions were dispensed within the United States in 2016.

Did you know?

All adverse reactions are commonly charted in red ink in the patient's record and usually are noted on the front of the chart. Failure to follow correct documentation procedures may result in malpractice lawsuits.

Did you know?

Chronic marijuana use can damage the white blood cells and reduce the immune system's ability to respond to disease by as much as 40%. Without a strong immune system, the body is vulnerable to all kinds of degenerative and infectious diseases.

Did you know?

Giardia is one of the most common intestinal parasites worldwide, and infects up to 20% of the world population, mostly in poorer countries with inadequate sanitation. Infections are most common in children, though chronic Giardia is more common in adults.

A closer look at glycolysis. PART B A closer look at glycolysis. PART B
Under what conditions can part-time employment in high school be a negative influence on school ... Under what conditions can part-time employment in high school be a negative influence on school ...
After all valves have been properly measured and adjusted as necessary, start the reassembly process ... After all valves have been properly measured and adjusted as necessary, start the reassembly process ...
Step 3 in the diagnostic process is to retrieve any stored diagnostic trouble codes. Step 3 in the diagnostic process is to retrieve any stored diagnostic trouble codes.
Chemicals can adversely affect personal protective equipment (PPE) in three ways: They can permeate ... Chemicals can adversely affect personal protective equipment (PPE) in three ways: They can permeate ...
Question 37 Part 2 Question 37 Part 2
Video: HDL (high density lipoprotein)

For a complete list of videos, visit our video library