Skills and Trades

All of the following are types of clips EXCEPT ________. A) Cotter B) E clip C) C clip D) ...

Started by littleanan

A flex-fuel vehicle can be identified by ________. A) VECI B) Emblems on the side, front, and/or ...

Started by jc611

Which of these procedures used to convert coal-to-liquid fuel, creates a synthetic crude, called ...

Started by chandani

Metric thread pitch is measured in ________. A) Millimeters B) Inches C) Centimeters D) None of ...

Started by theo

Which of these is used to clean threads of a bolt to be reused? A) Tap B) Thread chaser C) Die D) ...

Started by jc611

Which of these is added to a fuel for testing purposes to avoid problems with the variation of ...

Started by silviawilliams41

The strength or classification of a bolt is known as ________. A) Pitch B) Gauge C) Grade D) None ...

Started by burton19126

Which of these is NOT a type of lock nut? A) Nylon ring B) Castle nut and cotter pin C) Wing nut ...

Started by j.rubin

The most commonly used tap is a ________. A) Bottoming tap B) Tapered tap C) Both A and B D) ...

Started by magmichele12

Sheet metal screws are also known as ________. A) Machine screws B) Self tapping screws C) ...

Started by MirandaLo

Coolant is water and ________. A) Methanol B) Kerosene C) Glycerin D) Ethylene ...

Started by schs14

As the percentage of antifreeze in the coolant increases, ________. A) The freeze point decreases ...

Started by deesands

Technician A says that a drill is usually needed to remove a rivet. Technician B says that the most ...

Started by Mr3Hunna

Which type nut is used on top of a regular nut to prevent loosening of the fastener? A) Jam nut ...

Started by cookcarl

When working with hand tools, always ________. A) Pull the wrench - don't push a wrench B) Push ...

Started by KimWrice

Which tool listed is a brand name? A) Monkey wrench B) Vise Grips C) Locking pliers D) Side ...

Started by jman1234

A voltmeter was used to check the coolant and a reading of 0.2 volt with the engine off was ...

Started by Chelseaamend

Which is the most commonly used tool by automotive service technicians? A) Wrench B) Hammer C) ...

Started by colton

All these are functions of coolant EXCEPT ________. A) Increases air flow across the radiator B) ...

Started by madam-professor

Which type of pliers is capable of fitting over a large object? A) Slip joint pliers B) ...

Started by mspears3

Technician A says that galvanic activity is the result of a poor ground connection. Technician B ...

Started by Frost2351

Technician A says that an adjustable wrench has a box end on one end and an open end at the other ...

Started by Zoey63294

The upper radiator hose collapses when the engine cools. What is the most likely cause? A) The ...

Started by naturalchemist

Technician A says that the radiator should always be inspected for leaks and proper flow before ...

Started by Caiter2013

Water pumps ________. A) Are driven by the engine crankshaft or camshaft B) Only work at idle ...

Started by 123654777