A voltmeter was used to check the coolant and a reading of 0.2 volt with the engine off was measured. A reading of 0.8 volt was measured with the engine running and all electrical accessories turned on. Technician A says that the coolant should be flushed to solve the galvanic activity. Technician B says that the ground wires and connections should be inspected and repaired to solve the electrolysis problem. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
Question 2
What tool should be used to loosen or tighten brake or fuel lines?
A) Locking pliers B) Line wrench
C) Torque wrench D) Multigroove adjustable pliers
Pulse check with paitent's forearm at side
A typical engine-driven cooling fan.
A camshaft position actuator used in a cam-in-block engine.
The transmission and flexplate (flywheel) were removed to check the exact location of this oil ...
Voltmeter showing the battery voltage when the headlights were on (engine off) for one minute.
Raster is the best scope position to view the spark lines of all the cylinders to check for ...