This topic contains a solution. Click here to go to the answer

Author Question: A simple welding sequence used to reduce or eliminate distortion is to make short welds _____. a. ... (Read 183 times)

kshipps

  • Hero Member
  • *****
  • Posts: 571
A simple welding sequence used to reduce or eliminate distortion is to make short welds _____.
 
  a. on alternating sides of a joint
  b. on the ends of a joint
  c. on one side and long welds on the other side of a joint
  d. in the middle and long welds on the ends of a joint

Question 2

Open-root joints should have a root opening of _____.
 
  a. 1/32 to 1/16 (0.8 to 1.6 mm)
  b. 1/16 to 1/8 (1.6 to 3.2 mm)
  c. 1/8 to 1/4 (3.2 to 6.4 mm)
  d. 1/4 to 1/2 (6.4 to 12.7 mm)



Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

dlook33

  • Sr. Member
  • ****
  • Posts: 344
Answer to Question 1

a

Answer to Question 2

b




dlook33

  • Sr. Member
  • ****
  • Posts: 344

 

Did you know?

The shortest mature adult human of whom there is independent evidence was Gul Mohammed in India. In 1990, he was measured in New Delhi and stood 22.5 inches tall.

Did you know?

According to animal studies, the typical American diet is damaging to the liver and may result in allergies, low energy, digestive problems, and a lack of ability to detoxify harmful substances.

Did you know?

In inpatient settings, adverse drug events account for an estimated one in three of all hospital adverse events. They affect approximately 2 million hospital stays every year, and prolong hospital stays by between one and five days.

Did you know?

Ether was used widely for surgeries but became less popular because of its flammability and its tendency to cause vomiting. In England, it was quickly replaced by chloroform, but this agent caused many deaths and lost popularity.

Did you know?

Certain chemicals, after ingestion, can be converted by the body into cyanide. Most of these chemicals have been removed from the market, but some old nail polish remover, solvents, and plastics manufacturing solutions can contain these substances.

For a complete list of videos, visit our video library