A simple welding sequence used to reduce or eliminate distortion ...

[kshipps]

A simple welding sequence used to reduce or eliminate distortion is to make short welds _____.
 
  a. on alternating sides of a joint
  b. on the ends of a joint
  c. on one side and long welds on the other side of a joint
  d. in the middle and long welds on the ends of a joint

Question 2

Open-root joints should have a root opening of _____.
 
  a. 1/32 to 1/16 (0.8 to 1.6 mm)
  b. 1/16 to 1/8 (1.6 to 3.2 mm)
  c. 1/8 to 1/4 (3.2 to 6.4 mm)
  d. 1/4 to 1/2 (6.4 to 12.7 mm)

[dlook33]

Answer to Question 1

a

Answer to Question 2

b

[kshipps]

Thank you!

[dlook33]

Always glad to help...