The machine dimensions needed to use lasers to align vertical machines are: ________.
A) distance from laser to center line of rotation, vertical offset, vertical angularity, number of bolts in the shim plane
B) length of the jackshaft, diameter of coupling bolts, distance from feet to couplings
C) distance from laser to prism, laser to coupling center, greatest diameter between two fastening bolts in the shim plane
D) distance from coupling to coupling, MTBM to STAT, total number of shims
Question 2
For alignment, angles are often expressed in mils per _____ inches rather than mils per inch.
A) 20 B) 15 C) 10 D) 5
"Visual Acuity Testing, Assessing Distance Vision
Major moons of Uranus in order of increasing distance (left to right), at their proper relative size
The heat range of a spark plug is determined by the distance the heat has to flow from the tip to ...
Calculate the distance from point R(17,5) to the line ... Round to the nearest tenth of a
A peice of paper has a perimeter of 100 cm and an area of 616cm^2. Find the dimensions
Metaphase Centromeres align on metaphase plate