Author Question: A safer alternative to de-brazing components is to: A) Pressurize the system with 100 psig of ... (Read 106 times)

TVarnum · **on:** Jul 27, 2018

A safer alternative to de-brazing components is to:

A) Pressurize the system with 100 psig of nitrogen prior to de-brazing.
B) Cut the components out with a hack saw.
C) Melt through the pipe with a cutting torch.
D) Cut them out with a tubing cutter.

Question 2

If you try to remove tubing before all the brazing material is molten, the tubing will:

A) Not move. B) Break off in the joint.
C) Remove easily. D) Warp or bend.