« previous next »

Author Question: While troubleshooting a circuit the voltage seems to be zero; what if any adjustment should be ... (Read 73 times)

Hungry!

  • Hero Member
  • *****
  • Posts: 1,071
on: Jul 28, 2018
While troubleshooting a circuit the voltage seems to be zero; what if any adjustment should be checked on the oscilloscope?
 
  A) focus setting B) AC/GND/DC switch
  C) time division setting D) trigger level

Question 2

Superimposing an AC voltage of 3.54 Vrms with a DC source of 10 V results in a waveform that:
 
  A) peaks at 20 V. B) peaks at 13.54 V. C) peaks at 15 V. D) both B and C


brittiany.barnes

  • Sr. Member
  • ****
  • Posts: 321
Reply #1 on: Jul 28, 2018
Answer to Question 1

B

Answer to Question 2

C


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

More than 50% of American adults have oral herpes, which is commonly known as "cold sores" or "fever blisters." The herpes virus can be active on the skin surface without showing any signs or causing any symptoms.

Did you know?

Anti-aging claims should not ever be believed. There is no supplement, medication, or any other substance that has been proven to slow or stop the aging process.

Did you know?

Approximately 25% of all reported medication errors result from some kind of name confusion.

Did you know?

Computer programs are available that crosscheck a new drug's possible trade name with all other trade names currently available. These programs detect dangerous similarities between names and alert the manufacturer of the drug.

Did you know?

Calcitonin is a naturally occurring hormone. In women who are at least 5 years beyond menopause, it slows bone loss and increases spinal bone density.

Distance from Initial Change in Membrane Potential vs. Voltage Change Relative to Initial Change Distance from Initial Change in Membrane Potential vs. Voltage Change Relative to Initial Change
Start the valve adjustment procedure by first disconnecting and labeling, if necessary, all ... Start the valve adjustment procedure by first disconnecting and labeling, if necessary, all ...
Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ... Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ...
When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ... When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ...
Write the equation for the voltage at any instant, and find the voltage at 4.0 s Write the equation for the voltage at any instant, and find the voltage at 4.0 s
Find the voltage, current and power for each resistor in the circuit below Find the voltage, current and power for each resistor in the circuit below
Video: The pH scale - Strong acids and Weak acids

For a complete list of videos, visit our video library