The crankshaft is supported in the engine block by the ________.
A) Flywheel B) Main bearings C) Thrust plates D) Rod bearings
Question 2
Technician A says primary vibration is created by the slight differences in the inertia of the pistons between top dead center and bottom dead center. Technician B says secondary vibration is a strong low-frequency vibration caused by the movement of the piston traveling up and down in the cylinder. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
The rotating assembly for a V-8 engine that has eight pistons and connecting rods and one ...
The bore and stroke of pistons are used to calculate an engine’s displacement.
The oil pump is the only part in an engine that gets unfiltered engine oil. The oil is drawn up ...
A Toyota/Lexus hybrid electric vehicle has a ready light. If the ready light is on, the engine can ...
Checking the voltage drop between the TP sensor ground and a good engine ground with the ignition ...
The injectors receive fuel and are supported by the fuel rail.