Technician A says that most crankshafts can be reground to be 0.010, 0.020, or 0.030 inch undersize. Technician B says that most engine bearings are constructed with an aluminum shell for strength and are covered with a tin-lead alloy. Who is right?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Question 2
Technician A says that a radio can receive AM signals, but not FM signals, if the antenna is defective.
Technician B says that a good antenna should give a reading of about 500 ohms when tested with an ohmmeter between the center antenna wire and ground. Who is right?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
In 2013, Americans learned that the federal government massively surveys their phone calls and e-mai
Thread pitch gauge used to measure the pitch of the thread. This bolt has 13 threads to the inch.
A typical beginning technician tool set that includes the basic tools to get started.
After checking for stored diagnostic trouble codes (DTCs), the wise technician checks service ...
Pharmacy Technician
Field technician in Utah