How are the blower and coil arranged in most heat pump blower-coils?
A) the coil is before the blower - the fan draws air across the coil
B) the coil is after the blower - the fan draws air across the coil
C) the coil is after the blower - the fan forces air across the coil
D) the coil is before the blower - the fan forces air across the coil
Question 2
Why are both lines of a mini-split system insulated?
A) because it can connect up to 8 sections B) because they do not have any ductwork
C) because there is only one metering device D) because the entire unit is outdoors
The form and orientation of desert plants reduces heat gain from the environment and facilitates coo
When the exhaust is lean, the PCM applies a positive current into the pump cell.
A typical fuel-pump module assembly, which includes the pickup strainer and fuel pump, as well as ...
Locate the fuel-pump relay and remove by using a puller if necessary. Try to avoid rocking or ...
Place sheet or towel over area to be heated. Use sufficient heat barrier for the heat source used. ...
The Heat Index.