This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: What is output voltage at the end of the input pulse to an RC integrator if the resistance is 10 k, ... (Read 100 times)

tuffie

  • Hero Member
  • *****
  • Posts: 534
on: Jul 28, 2018
What is output voltage at the end of the input pulse to an RC integrator if the resistance is 10 k, the capacitance is 100 F and the input is a 50 V, 10 s pulse?
 
  A) 31.6 V B) 50 V C) 43.25 V D) 47.5 V

Question 2

What is output voltage at the end of the input pulse to an RL integrator if the resistance is 22 k, the inductor is 2 H and the input is a 12 V, 0.0909 ms pulse?
 
  A) 11.8 V B) 10.4 V C) 7.59 V D) 11.4 V


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

Kedrick2014

  • Sr. Member
  • ****
  • Posts: 359
Reply #1 on: Jul 28, 2018
Answer to Question 1

B

Answer to Question 2

C


tuffie

  • Hero Member
  • *****
  • Posts: 534
Reply #2 on: Jul 28, 2018
Both answers were spot on, thank you once again


Kedrick2014

  • Sr. Member
  • ****
  • Posts: 359
Reply #3 on: Jul 28, 2018
Great! Please up vote :D


« previous next »
 

Did you know?

This year, an estimated 1.4 million Americans will have a new or recurrent heart attack.

Did you know?

Acetaminophen (Tylenol) in overdose can seriously damage the liver. It should never be taken by people who use alcohol heavily; it can result in severe liver damage and even a condition requiring a liver transplant.

Did you know?

The first war in which wide-scale use of anesthetics occurred was the Civil War, and 80% of all wounds were in the extremities.

Did you know?

About 3% of all pregnant women will give birth to twins, which is an increase in rate of nearly 60% since the early 1980s.

Did you know?

Autoimmune diseases occur when the immune system destroys its own healthy tissues. When this occurs, white blood cells cannot distinguish between pathogens and normal cells.

Palade's use of the pulse-chase method to study protein secretion Palade's use of the pulse-chase method to study protein secretion
Voltmeter hook-ups for voltage-drop testing of a Ford-type cranking circuit. Voltmeter hook-ups for voltage-drop testing of a Ford-type cranking circuit.
Measuring the resistance of the ECT sensor. The resistance measurement can then be compared with ... Measuring the resistance of the ECT sensor. The resistance measurement can then be compared with ...
Altitude affects the MAP sensor voltage. Altitude affects the MAP sensor voltage.
Use the test light to check for voltage at terminal 30 of the relay. The ignition may have to be in ... Use the test light to check for voltage at terminal 30 of the relay. The ignition may have to be in ...
The EGR valve pintle is pulse-width modulated and a three-wire potentiometer provides ... The EGR valve pintle is pulse-width modulated and a three-wire potentiometer provides ...
Video: Factors that influence muscle tension - Sarcomere length and force, understretched and overstretched

For a complete list of videos, visit our video library