This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: What is output voltage at the end of the input pulse to an RC integrator if the resistance is 10 k, ... (Read 50 times)

tuffie

  • Hero Member
  • *****
  • Posts: 534
on: Jul 28, 2018
What is output voltage at the end of the input pulse to an RC integrator if the resistance is 10 k, the capacitance is 100 F and the input is a 50 V, 10 s pulse?
 
  A) 31.6 V B) 50 V C) 43.25 V D) 47.5 V

Question 2

What is output voltage at the end of the input pulse to an RL integrator if the resistance is 22 k, the inductor is 2 H and the input is a 12 V, 0.0909 ms pulse?
 
  A) 11.8 V B) 10.4 V C) 7.59 V D) 11.4 V


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

Kedrick2014

  • Sr. Member
  • ****
  • Posts: 359
Reply #1 on: Jul 28, 2018
Answer to Question 1

B

Answer to Question 2

C


tuffie

  • Hero Member
  • *****
  • Posts: 534
Reply #2 on: Jul 28, 2018
Both answers were spot on, thank you once again


Kedrick2014

  • Sr. Member
  • ****
  • Posts: 359
Reply #3 on: Jul 28, 2018
Great! Please up vote :D


« previous next »
 

Did you know?

The average adult has about 21 square feet of skin.

Did you know?

The familiar sounds of your heart are made by the heart's valves as they open and close.

Did you know?

Symptoms of kidney problems include a loss of appetite, back pain (which may be sudden and intense), chills, abdominal pain, fluid retention, nausea, the urge to urinate, vomiting, and fever.

Did you know?

Blood is approximately twice as thick as water because of the cells and other components found in it.

Did you know?

The highest suicide rate in the United States is among people ages 65 years and older. Almost 15% of people in this age group commit suicide every year.

Palade's use of the pulse-chase method to study protein secretion Palade's use of the pulse-chase method to study protein secretion
Nine pulse sites on the human body. Nine pulse sites on the human body.
A pulse oximeter. A pulse oximeter.
A potentiometer uses a movable contact to vary resistance and send an analog voltage to the PCM. A potentiometer uses a movable contact to vary resistance and send an analog voltage to the PCM.
When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ... When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ...
An aluminum wire has a length of 27.0 m and a resistance of 2.90 n at 20.00C. As An aluminum wire has a length of 27.0 m and a resistance of 2.90 n at 20.00C. As
Video: Pressure Flow Model Animation

For a complete list of videos, visit our video library