Author Question: If a blower motor has seized or dragging bearings it will pull too many amps when on high. This can ... (Read 176 times)

viki · **on:** Jun 22, 2018

If a blower motor has seized or dragging bearings it will pull too many amps when on high. This can be checked by using a ________.

A) Fused 20A jumper wire B) Disconnecting the battery
C) New blower resistor pack D) Test light

Question 2

To determine if a windshield wiper problem is electrical or mechanical, the technician should ________.

A) Check to see if the fuse is blown
B) Check the washer fluid for contamination
C) Check the condition of the wiper blades
D) Disconnect the linkage from the windshield wiper motor and operate the windshield wiper