When the V6 Accord hybrid engine is operating on three cylinders, what is done to reduce the noise and vibration?
A) Retards the ignition timing to reduce noise and vibration in the cylinders
B) Uses active engine mounts
C) Uses active noise control
D) Both B and C are correct
Question 2
Scan data indicates that the starter-generator control module (SGCM) on a GM hybrid pickup has overheated. The LEAST likely cause would be ________.
A) Stuck thermostat B) Inoperative fan
C) Faulty electric pump D) Low coolant level
a) Using a soft pillow rather than a hard bolster under the knees will reduce pressure on the back ...
A typical ratchet used to rotate a socket. A ratchet makes a ratcheting noise when it is being ...
The level in the coolant recovery system raises and lowers with engine temperature.
Engine oil pressure is used to switch cam lobes on a VTEC system.
A dual turbocharger system installed on a small block Chevrolet V-8 engine.
This Toyota cap has a warning—the check engine light will come on if not tightened until one ...