« previous next »

Author Question: Engines are mounted to engine stands __________. A) Using bellhousing bolt holes B) Using holes ... (Read 259 times)

awywial

  • Hero Member
  • *****
  • Posts: 577
on: Jun 23, 2018
Engines are mounted to engine stands __________.
 
  A) Using bellhousing bolt holes B) Using holes drilled in the engine block
  C) Either A or B D) Neither A nor B

Question 2

Nickel metal hydride (NiMH) batteries can be damaged if exposed to temperatures higher than about _______.
 
  A) 200 deg F B) 175 deg F C) 150 deg F D) 225 deg F


heyhey123

  • Sr. Member
  • ****
  • Posts: 353
Reply #1 on: Jun 23, 2018
Answer to Question 1

C

Answer to Question 2

C


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
« previous next »
 

Did you know?

Intradermal injections are somewhat difficult to correctly administer because the skin layers are so thin that it is easy to accidentally punch through to the deeper subcutaneous layer.

Did you know?

There are immediate benefits of chiropractic adjustments that are visible via magnetic resonance imaging (MRI). It shows that spinal manipulation therapy is effective in decreasing pain and increasing the gaps between the vertebrae, reducing pressure that leads to pain.

Did you know?

When Gabriel Fahrenheit invented the first mercury thermometer, he called "zero degrees" the lowest temperature he was able to attain with a mixture of ice and salt. For the upper point of his scale, he used 96°, which he measured as normal human body temperature (we know it to be 98.6° today because of more accurate thermometers).

Did you know?

Thyroid conditions may make getting pregnant impossible.

Did you know?

Human stomach acid is strong enough to dissolve small pieces of metal such as razor blades or staples.

A wire wound electrical heater is used to warm the intake air on some diesel engines A wire wound electrical heater is used to warm the intake air on some diesel engines
Stronger threads are created by cold rolling a heat-treated bolt blank instead of cutting the ... Stronger threads are created by cold rolling a heat-treated bolt blank instead of cutting the ...
After adjusting the valves that are closed, rotate the engine one full rotation until the engine ... After adjusting the valves that are closed, rotate the engine one full rotation until the engine ...
After connecting the shutoff tool, start the engine and operate all accessories. Stop the engine ... After connecting the shutoff tool, start the engine and operate all accessories. Stop the engine ...
A fuel-pressure graph after key on, engine off (KOEO) on a TBI system. A fuel-pressure graph after key on, engine off (KOEO) on a TBI system.
Automotive Engine Performance, 5th Edition Automotive Engine Performance, 5th Edition
Video: Glomerubular filtrate rate -pressures that affect GFR and net filtration pressure

For a complete list of videos, visit our video library