A 132 in3 engine operates at 4500 RPM and has an MEP value of 140 psi. The brake horsepower at 4500 RPM is measured to be 87 bhp. Calculate the mechanical efficiency of this engine, and round to the nearest tenth of a percent.
What will be an ideal response?
Question 2
The brake horsepower of a V-6 engine is measured to be 171 bhp 5500 RPM. The indicated horsepower at this engine speed is calculated to be 198 ihp. Calculate the mechanical efficiency, and round your result to the nearest tenth of a percent.
What will be an ideal response?
Using a torque wrench to tighten connecting rod nuts on an engine.
When an engine overheats, often the coolant overflow container boils.
Most air filter housings are located on the side of the engine compartment and use flexible rubber ...
Weak valve springs will produce a normal reading at idle, but as engine speed increases, the needle ...
To prevent ignition and fuel-injection operation while the engine is being cranked, remove both the ...
Typical engine analyzer hookup that includes a scope display. (1) Coil wire on top of the ...