This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: When using a brazing flux, it should be applied _____. a. only to the tube end b. to both the ... (Read 66 times)

asmith134

  • Hero Member
  • *****
  • Posts: 576
on: Jul 24, 2018
When using a brazing flux, it should be applied _____.
 
  a. only to the tube end
  b. to both the tube end and the fitting cup
  c. only to the fitting cup
  d. both before and after the brazing process

Question 2

When soldering 1-1/2 tubing in a horizontal position, you should _____.
 
  a. feed the solder from a single point
  b. start feeding solder at the top and work down
  c. start feeding solder near the bottom and work up
  d. turn the assembly to the vertical position first


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

heinisk01

  • Sr. Member
  • ****
  • Posts: 329
Reply #1 on: Jul 24, 2018
Answer to Question 1

a

Answer to Question 2

c


asmith134

  • Member
  • Posts: 576
Reply 2 on: Jul 24, 2018
YES! Correct, THANKS for helping me on my review

bigcheese9

  • Member
  • Posts: 333
Reply 3 on: Yesterday
Wow, this really help

« previous next »
 

Did you know?

A good example of polar molecules can be understood when trying to make a cake. If water and oil are required, they will not mix together. If you put them into a measuring cup, the oil will rise to the top while the water remains on the bottom.

Did you know?

Hyperthyroidism leads to an increased rate of metabolism and affects about 1% of women but only 0.1% of men. For most people, this increased metabolic rate causes the thyroid gland to become enlarged (known as a goiter).

Did you know?

There are immediate benefits of chiropractic adjustments that are visible via magnetic resonance imaging (MRI). It shows that spinal manipulation therapy is effective in decreasing pain and increasing the gaps between the vertebrae, reducing pressure that leads to pain.

Did you know?

Sperm cells are so tiny that 400 to 500 million (400,000,000–500,000,000) of them fit onto 1 tsp.

Did you know?

Only 12 hours after an egg cell is fertilized by a sperm cell, the egg cell starts to divide. As it continues to divide, it moves along the fallopian tube toward the uterus at about 1 inch per day.

Rosalind Franklin and X-ray diffraction applied to DNA wet fibres Rosalind Franklin and X-ray diffraction applied to DNA wet fibres
Tracheostomy Tube Tracheostomy Tube
Reservoirs and Flux Reservoirs and Flux
The fuel pickup tube is part of the fuel sender and pump assembly. The fuel pickup tube is part of the fuel sender and pump assembly.
After the chemical exfoliation substance has been applied, wrap the two top sheets around the client ... After the chemical exfoliation substance has been applied, wrap the two top sheets around the client ...
A(n) _____ is a spur-of-the-moment question. Fill in the blank(s) with correct word A(n) _____ is a spur-of-the-moment question. Fill in the blank(s) with correct word
Video: Genetic terms Animation

For a complete list of videos, visit our video library