Author Question: When using weave beads on flat V-groove welds, keep the electrode angle at a 0-degree work angle ... (Read 161 times)

magmichele12 · **on:** Jul 24, 2018

When using weave beads on flat V-groove welds, keep the electrode angle at a 0-degree work angle with a
_____.

a. 5- to 10-degree drag angle
b. 10- to 15-degree drag angle
c. 15- to 20-degree drag angle
d. 20- to 22-degree drag angle

Question 2

To conform with AWS limited-thickness test coupon requirements, weld coupons should be carbon steel that is
_____.

a. 1/4 thick
b. 3/8 thick
c. 1/2 thick
d. 3/4 thick