Author Question: When applying the remaining passes on open-root V-groove pipe welds, they should be done using ... (Read 114 times)

skymedlock · **on:** Jul 24, 2018

When applying the remaining passes on open-root V-groove pipe welds, they should be done using _____.

a. weave beads and a slight side-to-side motion
b. weave beads and 45-degree work angle
c. stringer beads and a 45-degree work angle
d. stringer beads and a slight side-to-side motion

Question 2

To fuse the weld when performing an overhead open-root V-groove weld on plate, adjust the _____.

a. clamps
b. weld position
c. electrode work angle
d. electrode drag angle

Athena23 · **Reply #1 on:** Jul 24, 2018

Answer to Question 1

d

Answer to Question 2

c

skymedlock · **Reply #2 on:** Jul 24, 2018

Both answers were spot on, thank you once again

Athena23 · **Reply #3 on:** Jul 24, 2018

Great! Please up vote

Author Question: When applying the remaining passes on open-root V-groove pipe welds, they should be done using ... (Read 114 times)

skymedlock

When applying the remaining passes on open-root V-groove pipe welds, they should be done using ...

Related Topics

Need homework help now?

Athena23

When applying the remaining passes on open-root V-groove pipe welds, they should be done using ...

skymedlock

When applying the remaining passes on open-root V-groove pipe welds, they should be done using ...

Athena23

When applying the remaining passes on open-root V-groove pipe welds, they should be done using ...