It is acceptable to apply fasteners to flanges only on one side ...

[yoooooman]

It is acceptable to apply fasteners to flanges only on one side of a steel-framed wall _____.
 
  a. when constructing a loadbearing jamb
  b. when there is an L-header
  c. when framing a nonstructural wall
  d. when using balloon framing

Question 2

When a cutting job is completed and the oxyfuel equipment is no longer needed, the first step in shutting down
  the oxyfuel cutting equipment is to _____.
 
  a. close the fuel gas cylinder valve
  b. back out the fuel gas and oxygen regulator adjusting screws
  c. open the fuel gas torch valve
  d. open the oxygen torch valve

[anoriega3]

Answer to Question 1

c

Answer to Question 2

a

[yoooooman]

YES! Correct, THANKS for helping me on my review

[smrtceo]

Thanks for the timely response, appreciate it